Floor Restoration

How To Use Sanding For Floor Restoration

These days even non-professionals can effectively sand the floors in their homes because there excellent sanding machines on offer. All the same, it is crucial for those who are not familiar with the sanders to be careful as they may linger at one point for long time and “eat” into the floor. Non-professionals should first get used to the sanding machines they plan to use by practicing when it is turned off. They should learn to walk around rooms and deal with corners until they become comfortable with operating the machinery. When looking at the floor sanding cost, the best floor sanding prices in Sydney and floor restoration are avaialble.

Choosing Sanding Equipment

Since home owners do not have to sand many floors at once, orbital sanders are a good choice for floor restoration. They generally take longer to eliminate the old finish that the drum sanders but they are easy to operate and unlikely to cause damage to floors. Amateurs can easily use random orbital sanders to move against or along the wood grain as long as they can keep them level all the time. Even orbital sanders can escape the grip of the operators and cause hard to remove markings. People who rent DIY floor sanders from rental stores use ramps or helpers as lifting them might cause back injury.

Palm sanders are more effective for sanding near baseboard moldings. They should however be used with sharp scrapers so as to remove any sections with old finish which sanders may have missed. Scrapers help to get into recesses at butt joints and board edges without going through the hard work or removing most material using sanders themselves.
For the sanding to be successful, it is essential to start with coarse -grit abrasives to remove surface scratches and old finish. Grits of over 60 should not be used as they can damage floors. Sanders should then move to finer abrasives gradually till they achieve the desires smoothness. The right way to do sanding is proceeding row by row and overlapping runs by half of the sanders width.

After sanding, floors will be fully restored after application of chosen lacquer and stain.